Baldor DSM S Series Specifications Page 14
- Page / 122
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
3-2 Basic Installation MN1957
www.baldormotion.com
3.1.2 Mounting the NextMove ESB-2
Before touching the unit be sure to discharge static electricity from your body
and clothing by touching a grounded metal surface. Alternatively, wear an earth
strap while handling the unit.
Ensure you have read and understood the location requirements in section 3.1.1. Mount the
NextMove ESB-2 using the supplied M4 screws. For effective cooling, the NextMove ESB-2
must be mounted on a smooth non-flammable vertical surface. Orientation must be as
shown in Figure 1, with the two slots in the metal carrier / heat sink assembly at the bottom.
Figure 1: Package dimensions
There must be at least 20 mm (0.8 in) clearance between the NextMove ESB-2 and
neighboring equipment to allow sufficient cooling by natural convection. Remember to allow
additional space around the edges to accommodate the mating connectors and associated
wiring. For example, 70 mm (2.8 in) clearance will be required for connection of the serial
port cable.
CAUTION
All dimensions shows as
mm (inches)
170 (6.7)
245 (9.65)
140 (5.51)
124 (4.9)
45 (1.8)
Mounting keyhole and slot detail
A = 4.5 mm
B=10mm
C=11mm
D = 6.5 mm
Drawings not to scale
A
B
C
A
D
- MN1957 NextMove ESB-2 1
- Contents 3
- 5 Operation 4
- 6 Troubleshooting 4
- Appendices 5
- General Information 7
- 1 General Information 7
- Safety Notice 8
- Precautions 8
- 2.1 NextMove ESB-2 features 9
- 2-2 Introduction MN1957 10
- 2.2 Receiving and inspection 11
- 2.3 Units and abbreviations 12
- 3.1 Introduction 13
- 140 (5.51) 14
- 124 (4.9) 14
- 45 (1.8) 14
- 4.1 Introduction 17
- 4.1.1 Connector locations 18
- 4.2 Analog I/O 19
- 4.2.2 Analog outputs 21
- , Flex+Drive 22
- , MintDrive 22
- 4.3 Digital I/O 23
- 4-10 Input / Output MN1957 26
- MN1957 Input / Output 4-11 27
- 4.3.2 Digital outputs 28
- 4.4 Other I/O 29
- 4-14 Input / Output MN1957 30
- 4.4.3 Encoder inputs 0-4 31
- 4-16 Input / Output MN1957 32
- 4.4.4 Relay connections 34
- 4.4.5 USB port 34
- 4.4.6 Serial port 35
- 4.4.7 Using RS232 35
- 4-20 Input / Output MN1957 36
- MN1957 Input / Output 4-21 37
- 4.5.1 CAN connector 38
- 4.5.2 CAN wiring 39
- 4.5.3 CANopen 40
- MN1957 Input / Output 4-25 41
- 4.5.4 Baldor CAN 42
- MN1957 Input / Output 4-27 43
- MN1957 Input / Output 4-29 45
- 4-30 Input / Output MN1957 46
- 5.1 Introduction 47
- 5.1.4 Preliminary checks 48
- 5.1.5 Power on checks 48
- 5.2 Mint Machine Center 49
- 5.2.1 Starting MMC 50
- 5.3 Mint WorkBench 51
- 5.3.1 Help file 52
- 5.3.2 Starting Mint WorkBench 53
- 5-8 Operation MN1957 54
- 5.4 Configuring an axis 55
- 5.4.2 Selecting a scale 56
- MN1957 Operation 5-11 57
- 5-12 Operation MN1957 58
- 5.5 Stepper axis - testing 59
- 5-14 Operation MN1957 60
- MN1957 Operation 5-15 61
- 5-16 Operation MN1957 62
- MN1957 Operation 5-17 63
- 5-18 Operation MN1957 64
- MN1957 Operation 5-19 65
- 5-20 Operation MN1957 66
- 5.7.2 Underdamped response 67
- 5.7.3 Overdamped response 68
- MN1957 Operation 5-23 69
- 5.8.1 Calculating KVELFF 70
- MN1957 Operation 5-25 71
- 5-26 Operation MN1957 72
- 5.8.2 Adjusting KPROP 73
- 5-28 Operation MN1957 74
- MN1957 Operation 5-29 75
- 5-30 Operation MN1957 76
- MN1957 Operation 5-31 77
- 5.11 Saving setup information 78
- MN1957 Operation 5-33 79
- 5-34 Operation MN1957 80
- 6.1 Introduction 81
- 6.2 NextMove ESB-2 indicators 82
- 6.2.2 Communication 83
- 6.2.3 Motor control 84
- MN1957 Troubleshooting 6-5 85
- 6.2.4 Mint WorkBench 86
- 6.2.5 CANopen 87
- 6-8 Troubleshooting MN1957 88
- 6.2.6 Baldor CAN 89
- 6-10 Troubleshooting MN1957 90
- 7.1 Introduction 91
- 7.1.4 Digital inputs 92
- 7.1.6 Relay output 92
- 7.1.7 Stepper control outputs 93
- 7.1.8 Encoder inputs 93
- 7.1.9 Serial RS232/RS485 port 93
- 7.1.10 CAN interface 94
- 7.1.11 Environmental 94
- 7.1.12 Weights and dimensions 94
- EC Declaration of Conformity 95
- 7-6 Specifications MN1957 96
- A.1 Introduction 97
- A.1.2 Baldor CAN nodes 98
- A.1.3 HMI panels 99
- A.1.4 Baldor keypad 99
- A-4 Accessories MN1957 100
- B.1 Introduction 101
- MN1957 Index 115
- Index MN1957 116
- Comments 119
- Comments MN1957 120
Related products and manuals for Steppers Baldor DSM S Series
Steppers Baldor DSM S Series User Manual
(24 pages)
(24 pages)
Steppers Baldor DSM S Series User Manual
(4 pages)
(4 pages)
Steppers Baldor DSM S Series Specifications
(34 pages)
(34 pages)
© 2020, manymanuals.com. All rights reserved. | 0.872 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals