Baldor TS250 User Manual Page 14
- Page / 88
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
3-2 Receiving & Installation MN2417
Several other factors should be c arefully evaluated when selecting a location for installation:
1. For effective cooling and maintenance, the system should be mounted on a flat,
smooth, noncombustible level surface. A concrete pad is ideal and provides a secure
installation.
2. Installation should prevent water levels from reaching the generator. Drainage must be
adequate to keep concrete pad free from standing water.
3. Installation should prevent obstructions by buildup of leaves, grass, sand, snow, etc. If
these items pose a problem, consider building a small fence or other break to protect
the unit from accumulation of debris.
4. Installation should place the generator as close as possible to the transfer switch.
5. At least forty--eight (48) inches clearance must be provided on all sides for air flow.
6. Access must be provided to allow the enclosure covers to be opened or removed for
service and maintenance.
7. Maximum Ambient temperature is 122°F(50°C).
Figure 3-2 Generator Mounting (Skid)
B1
B
A
A2 A1
TS130/175 only
(4 Holes)
A2A1
TS25/45/80 only
(3 Holes)
A1A2 A2
TS250 only
(4 Holes)
A2 A1
A2A1
TA0000C10
BA0236A00
BA0236A02
TS400 only
(6 Holes)
A148
Holes each side
212427
10.85401--G10
Table 3-2 Mounting Dimensions
Generator A A1 A2 B B1
TS25 74 8.12 23.81 38 36
TS35 74 8.38 28.56 38 36
TS45 84 8.38 28.56 38 36
TS60 84 8.38 28.56 38 36
TS80 84 8.38 28.56 38 36
TS130 118 16.57 26.57 42 40
TS175 130 16.57 26.57 48 46
TS250 159 18.00 40.00 54 52
TS400 195 12.00 SeeFigure3-2 66 63
Secure the Generator (Skid Mount only)
Six mounting bolts (eight for TS130/175/250) in the base frame secure the generator to the
shipping pallet. Remove these bolts, lift the generator and remove the shipping pallet. Secure
the generator to the concrete pad using anchor hardware (not provided) in the base frame
mounting holes (holes are 0.66” diameter). See Figure 3-2 and Table 3-2. Anchor bolts must be
long enough to extend through the generator mounting frame.
- Tier 2/3 Towable Generators 1
- (Trailer and Skid Mounted) 1
- Table of Contents 3
- Section 1 5
- Product Safety Information 5
- IMPORTANT SAFETY INSTRUCTIONS 6
- Section 2 11
- General Information 11
- Section 3 13
- Receiving & Installation 13
- 10.85401--G10 14
- TA0000C10 14
- BA0236A00 14
- BA0236A02 14
- Continued 22
- Section 4 23
- Operation 23
- OFF MAN AUT 32
- Idle Function 37
- Stabil Time 37
- 4-16 Operation MN2417 38
- Table 4-10 Engine Setpoints 38
- Operation 4-17MN2417 39
- 4-18 Operation MN2417 40
- Operation 4-19MN2417 41
- 4-20 Operation MN2417 42
- Section 5 43
- Appendix A 47
- Wiring Diagrams 47
- A-2 Wiring Diagrams MN2417 48
- Wiring Diagrams A-3MN2417 49
- A-4 Wiring Diagrams MN2417 50
- Wiring Diagrams A-5MN2417 51
- A-6 Wiring Diagrams MN2417 52
- Wiring Diagrams A-7MN2417 53
- A-8 Wiring Diagrams MN2417 54
- Wiring Diagrams A-9MN2417 55
- A-10 Wiring Diagrams MN2417 56
- Wiring Diagrams A-11MN2417 57
- A-12 Wiring Diagrams MN2417 58
- Wiring Diagrams A-13MN2417 59
- A-14 Wiring Diagrams MN2417 60
- Wiring Diagrams A-15MN2417 61
- A-16 Wiring Diagrams MN2417 62
- Wiring Diagrams A-17MN2417 63
- A-18 Wiring Diagrams MN2417 64
- Wiring Diagrams A-19MN2417 65
- A-20 Wiring Diagrams MN2417 66
- Wiring Diagrams A-21MN2417 67
- A-22 Wiring Diagrams MN2417 68
- Wiring Diagrams A-23MN2417 69
- A-24 Wiring Diagrams MN2417 70
- Wiring Diagrams A-25MN2417 71
- A-26 Wiring Diagrams MN2417 72
- Wiring Diagrams A-27MN2417 73
- A-28 Wiring Diagrams MN2417 74
- Wiring Diagrams A-29MN2417 75
- A-30 Wiring Diagrams MN2417 76
- Wiring Diagrams A-31MN2417 77
- A-32 Wiring Diagrams MN2417 78
- Wiring Diagrams A-33MN2417 79
- A-34 Wiring Diagrams MN2417 80
- Wiring Diagrams A-35MN2417 81
- A-36 Wiring Diagrams MN2417 82
- Wiring Diagrams A-37MN2417 83
- A-38 Wiring Diagrams MN2417 84
- Wiring Diagrams A-39MN2417 85
- A-40 Wiring Diagrams MN2417 86
- Baldor District Offices 87
- © Baldor Electric Company 88
- Printed in USA 88
Related products and manuals for Generators Baldor TS250
Generators Baldor MN2412 User Manual
(32 pages)
(32 pages)
Generators Baldor PC32RI User Manual
(28 pages)
(28 pages)
Generators Baldor IDLC40-2J User Manual
(1 pages)
(1 pages)
Generators Baldor IDLC450-3D User Manual
(1 pages)
(1 pages)
Generators Baldor IDLC250-3J User Manual
(1 pages)
(1 pages)
© 2020, manymanuals.com. All rights reserved. | 0.489 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals